Epson Surecolor P7560/P9560 Firmware Schedule

version release date Remarks
LK01KA October 9, 2020
・ When using an automatic colorimeter with some third-party RIPs
 Fixed a point that may cause an error.

**********************
▽ Change the product specifications from the previous version
 We are improving the print quality.


-Improved the adjustment accuracy of the following two print adjustment items.

 (Touch the paper type on the main panel)
 1) "Print adjustment"-"Paper feed correction"-"Image quality priority"
 2) "Print adjustment"-"Print head position adjustment"
              -"Uni-d adjustment" (automatic / manual)

 * Set the paper in the printer and adjust.

-Option "Adobe PostScript3 expansion unit" (model number: SCPSU2)
 Improved character quality when used.

 * Please make the above print adjustments on the paper you are using.
  (Please refer to the attached guide material.)

 1) The print quality of print resolution of 1200x1200dpi or higher has been changed.
 2) "Proofing" for print quality of photo / proof paper
   Newly set.

  * Install an optional unit for the printer after the initial filling is completed.
   Please update to this farm with it attached.
  * Can be used with the latest PS driver version.
   Windows version Post Script Driver: Ver. 6.72 or higher
   Macintosh version Post Script Driver: Ver.10.82 or higher
LK09K9 September 28, 2020
-Improved the adjustment accuracy of the following two print adjustment items.

 (Touch the paper type on the main panel)
 1) "Print adjustment"-"Paper feed correction"-"Image quality priority"
 2) "Print adjustment"-"Print head position adjustment"
              -"Uni-d adjustment" (automatic / manual)

 * Set the paper in the printer and adjust.

-Option "Adobe PostScript3 expansion unit" (model number: SCPSU2)
 Improved character quality when used.

 1) The print quality of print resolution of 1200x1200dpi or higher has been changed.
 2) "Proofing" for print quality of photo / proof paper
   Newly set.

  * Install an optional unit for the printer after the initial filling is completed.
   Please update to this farm with it attached.
  * Can be used with the latest PS driver version.
   Windows version Post Script Driver: Ver. 6.72 or higher
   Macintosh version Post Script Driver: Ver.10.82 or higher

-Fixed the following bugs.
 
 1) If you select "No" on the HDD initialization screen, a system error will occur.
   May occur

   <Target option>
   ・ HDD unit (model number: SCHDU3)
   -Adobe PostScript3 expansion unit (model number: SCPSU2)

 2) The value may be invalid in the LFP accounting tool.
LK28K7 September 8, 2020
・ When user paper settings are selected on the main unit panel, the adjustment always takes precedence.
 It came to be done.
-"8" "x10" "(six-cut)" and "B5" have been added to the paper size.
-By default, "Left / Right Difference Correction" is set in the print settings of Fine Art Media.
 Changed to off.
-The point that the initialization of HDD and PS unit may not be completed normally
 Fixed.
-"Get Printer Information" and "Status" in Epson Edge Dashboard
 Fixed the problem that "Get sheet information" may not work properly.
-Improved gloss unevenness when printing the following media via the PS unit.

 <Target media>
  ・ EPSON Professional Photo Paper <Thick gloss>
  ・ EPSON Professional Photo Paper <Thin gloss>
  ・ EPSON photo paper
  ・ Barita
LK03K7 July 23, 2020
・ Professional photo paper <thin gloss> with SC-P7550
 The paper feed correction value has been optimized.
-Optimized the sequence when the power is turned on.
・ In some cases, RIPs made by other companies cannot measure colors normally using an automatic colorimeter.
 Fixed a certain point.
-Hard disk unit or Adobe PS3 expansion unit is not supported
 Changed so that an error is not displayed when printing even from a RIP made by another company.

LK24K4 June 26, 2020
-Reviewed the calculation method of the estimated ink cost value. 
-Optimized the internal sequence executed when the power is turned on.
-The selected user paper setting number is not reflected in the job history.
 Fixed the point.
・ The following contents displayed on the LFP accounting tool are correct.
 Fixed the point that it may not be displayed.
 ・ Cumulative ink usage
 -Total ink amount of aggregated information within the selected period
LK11K3 April 14, 2020
-When using some third-party paper with the optional automatic colorimeter
 Fixed the problem that the initial setting of the automatic colorimeter may fail.
 (* The automatic colorimeter is exclusively for RIPs made by other companies.)
・ USB connection for specific images (large capacity / wide / complex design, etc.)
 The point that the data transfer speed may slow down when printing
 Fixed.
LK28K2 March 17, 2020
-If the administrator password has not been set in WebConfig,
  Settings are required when accessing.
・ The cover was mistakenly operated during the initial filling of ink, and the initial filling was in the middle.
  Changed so that it can be restarted even if it is stopped.
・ If you accidentally cut thick paper that requires manual cutting, etc.
  If a CR motor overcurrent error (0x001138) is displayed on the panel,
  Changed so that it can be restored by turning the power on again.
-When the paper is removed at the roll paper end, the power LED keeps blinking.
  Fixed the problem that paper could not be fed.
・ Option (Adobe PS3 expansion unit / automatic colorimeter mounter /
  Due to changes in some parts used in the automatic take-up unit)
  I changed it so that it can be supported.
LK07K2 February 26, 2020
-Ink landing position has been adjusted for use with specific third-party RIPs.
LK28K1 February 5, 2020
-The accuracy of automatic adjustment has been improved.
-Fixed an error in the procedure of the cap cleaning guidance video.
-The point that the administrator password disappears when password encryption is turned on
 Fixed.
LK15JC January 9, 2020
・ Printhead maintenance even when the maintenance box is full
 Fixed the point that ink may be ejected for.
・ User paper settings changed on the LCD control panel may not be saved.
 Corrected the point that there was an error in the displayed main body illustration.