Canon 5D MkIII firmware upgrade

What’s new in this firmware:

  1. Uncompressed HDMI output is now enabled.
  2. Enables the center AF point to autofocus when the camera is used with Canon EF lens/extender combinations whose combined maximum aperture is f/8.
  3. Improves the speed of the camera’s acquisition of focus when using a Canon Speedlite’s AF-assist beam.
  4. Fixes a phenomenon in which the LCD monitor may freeze and display Err 70 or Err 80 when a still photo is taken during Live View or in movie shooting mode.
  5. Fixes a phenomenon that may occur when the continuous shooting priority setting is enabled for multiple exposures, such that, after the sixth image is taken, there is a slight pause before the remainder of the sequence is completed.
  6. Fixes a phenomenon in which the viewfinder display shows incorrect information during AEB shooting.
  7. Communication with the WFT-E7 Wireless File Transmitter has been improved.
  8. When images have been successfully transferred with the WFT-E7 Wireless File Transmitter through the FTP protocol, an “O” will be displayed. When images have not been successfully transferred with the WFT-E7 Wireless File Transmitter through the FTP protocol, an “X” will be displayed.
  9. Fixes a phenomenon in which the camera may not function properly when an Eye-Fi card is used.
  10. Fixes a phenomenon in which the focal length value listed in the Exif information is not displayed correctly for images shot with the EF 24-70mm F4L IS USM lens.
  11. Fixes a phenomenon in which the lens firmware cannot be updated properly.
  12. Corrects errors in the Arabic language menu.
  13. Fixes a phenomenon in which the camera changes the AF microadjustment value to -8.
  14. Fixes a phenomenon in which the on-screen guidance cannot be fully displayed when setting
    the maximum limit value for the “Setting the ISO Speed Range for Auto ISO” option.

Heres the Firmware link

http://support-au.canon.com.au/P/search?model=EOS%205D%20Mark%20III&filter=0&menu=download